*******************************************
* SENCITYLINK 60 - SOFTWARE RELEASE NOTES *
*                                         *
* Author: ras                             *
*******************************************


Firmware Version 1.48 (2009-11-19)
----------------------------------
- VLAN: Problem with standard IP interface und VLAN IP interface inside the same subnet fixed. Now there is only one IP interface available (which can accept tagged or untagged frames, depending if the interface does belong to a VLAN or not)


Firmware Version 1.46 (2009-07-10)
----------------------------------
- SNMP: snmpget bug fix (SNMP requests of non-existing objects) for Huber+Suhner part of MIB


Firmware Version 1.45 (2009-07-03)
----------------------------------
- SNMP: snmpgetnext bug fix for Huber+Suhner part of MIB
- VLAN: Bug with four digit VLAN ID fixed


Firmware Version 1.44 (2009-05-04)
----------------------------------
- SNMP: Bug with snmpgetnext (interfaces group) fixed


Firmware Version 1.43 (2009-04-07)
----------------------------------
- Multicast storm protection enabled
- Following SNMP MIB-2 objects have been added: ifNumber, ifIndex, ifDescr, ifSpeed, ifPhysAddress, ifType, ifAdminStatus, ifOperStatus, ifInOctets, ifInUcastPkts, ifInErrors, ifOutOctets, ifOutUcastPkts, ifOutErrors


Firmware Version 1.41 (2009-02-24)
----------------------------------
- Broadcast storm protection enabled


Firmware Version 1.40 (2008-12-22)
----------------------------------
- Spelling mistakes corrected
- "Trap destination" field length increased in "SNMP Configuration" page
- Domain Name Server (DNS) configuration support added to "Network Configuration" page
- Revision of the SNMP functionality:
  o Revision of MIB file
  o New SNMP Objects introduced
  o New SNMP Traps introduced
  o SNMP community string can be set
- "Reset Configuration" software button added to "Firmware/Reboot" page
- Change of username and password now only possible by entering old password
- If DHCP mode is used, the assigned address is displayed on the "Network Configuration" page
- If auto-negotiation mode is used, the negotiated configuration is displayed "Network Configuration" page
- Only the changed HTML elements (traffic light, dB value) are refreshed (not the entire page)
- Revision of the "Network Statistics" page:
  o both, Air port and Ethernet port are monitored
- Logging of the last 48 hours (Receive Power, Temperature, Link Quality, ...):
  o Parameters are written once a minute into the logfile
  o Entries older than 48 hours are deleted
  o Log file can be accessed through web interface
- Calibration of the displayed receive power on the "Radio Alignment" page
  (not available for terminals delivered with firmware older than v1.40)
- Huge packet support enabled (max. Ethernet frame size: 1916 Bytes)
- "Save Configuration" and "Restore Configuration" dialog added
- VLAN support added:
  o VLAN ID, VLAN IP address and VLAN subnet mask of the terminal can be configured
- Resynchronize button added to "Radio Alignment" page
- MDI/MDIX configuration dialog added to "Network Configuration" page